Meteor Light and Sound company

Disco lighting - Moving Heads
DJ Lighting - Scanners
Centerpeices
Controllers
Projection
Theatrical
DJ Effects
Club Effects
Foggers
LED lights
Cable Testers



For control module housing:
Rack Kit

For speakers and audio equipment:
Solid NRG

To view the product demos as intended you will need Flash Player 8:
Click on link to get Flash Player 9

Cable CheckMate Audio Cable Tester

Meteor Cable CheckMate Cable Tester

ALL new Audio cable tester with SINGLE & DOUBLE ended testing.

This is also a LAN cable tester and an Ethernet cable tester

Connectors for the Cable CheckMate Cat 5e Network Cable Testers

  • 3, 4 & 5 Pole XLR Male
  • 6.35mm Jack, stereo or mono
  • Single or Twin 4.4mm Bantam, stereo or mono
  • 3.5mm Jack, stereo or mono
  • 4 & 8 Pole Speakon
  • DIN 3 & 5 (180°) & 8 Pole
  • RCA Phono
  • BNC
  • RJ45, Ethercon
  • USB A & B

Features of the Cable CheckMate Cat 5e cable tester:
There are 2 rows of 9 LED's corresponding to each of the possible connector pins of the Cable CheckMate – Cat 5e Network Cable Testers and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.

Memory Option
There are 4 LED's indicating the state of the MEMORY option.
If the MEMORY LED is on, then Cable CheckMate automatically scans all the connections
and compares against information held with just one press of the test button.
MEMORY works in both test modes.

Test modes for Cable CheckMate Cat 5e Cable Testers:
Double ended - both ends of the cable under test are plugged into Cable CheckMate.
Single ended - one end of the network cable under test is plugged into Cable CheckMate the
other into another Cable CheckMate.

Specification Double {Single} Ended:
Continuity and Short Circuits, less than 255K {75K} ohms
Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
Less than 2 {5} second test time
L 203mm W 150mm D 50mm
Uses 9v PP3 battery (not supplied) Continuity and Short Circuits, less than 255K {75K} ohms.

Download Operations Manual (PDF)

< Back